2-Chloronicotinic Acid Intermediate of Nicosulfuron Cas 2942-59-8

Unit Price: USD 1.0000 / Kilogram
Payment Type: T/T
Incoterm: CIF
Min. Order: 1 Kilogram
Delivery Time: 15 Days

Basic Info

Model No.: 2942-59-8

Additional Info

Packaging: AS REQUIRED

Productivity: 50 TON


Transportation: Air

Place of Origin: CHINA


Product Description

2-Chloronicotinic acid cas number is 2942-59-8, also known as 2-chloro nicotinic acid, has special physiological activity and is an important pharmaceutical and pesticide intermediate for the production of agricultural herbicides, insecticides, pharmaceutical antibacterials, etc. . Therefore, he has high application value and market value. In recent years, with the development of pesticides and medicine, nicotinic acid series chemicals have drawn more and more attention and have a wide range of applications. As an important nicotinic acid series, 2-chloronicotinic acid cas 2942-59-8 is mainly used for the preparation of novel and highly effective herbicides nicosulfuron, anti-inflammatory analgesic niflumic acid, pranoprofen and HIV reverse enzyme inhibitor nevirapine. These products are in short supply at home and abroad. Therefore,strengthen the research on production process of 2-chloronicotinic acid has great significance. At present, the literature report about synthesis of 2-chloronicotinic acid is less in the country, there are three main synthetic routes: (1) use Nicotinic acid as the raw material to prepare nicotinic acid N-oxide, then take chlorination between the oxide and POCl3 to Prepare of 2 - chloronicotinic acid, due to the low selectivity of the second chloride and thus yield is more lower; (2) use 2-chloro-3-methylpyridine as raw material, mixed acid oxidation of methyl 3 was Carboxyl, the method requires harsh conditions, equipment investment is large, resulting in more waste water, it is difficult to industrialized production (3) 2-chloronicotinine as raw materials synthesis of 2-chloronicotinic acid, the method not only difficult to obtain raw materials, but also the process is immature, basically do not have the conditions for industrialization.(4) 3-cyanopyridine as the starting material, the production of N-oxide by hydrogen peroxide oxidation, and then use POCl3 as a nucleophilic to take substitution reaction, and finally hydrolyzed under alkaline conditions, through crystallization to get 2-Chloronicotinic acid. In the actual production is reference to the last method.
At present, the reaction system of 2-chloronicotinic acid has the defects of low preparation purity and serious pollution of wastewater discharge. The wastewater discharged from 2-chloronicotinic acid production is mainly for the production of process wastewater and workshop flushing wastewater. Production wastewater includes oxidized centrifuged wastewater, chlorinated centrifuged wastewater and hydrolyzed crystalline centrifuged wastewater. Specific conditions are as follows: 1. Oxidative centrifugal wastewater is strongly acidic and high COD wastewater, the reaction molar yield of about 94%, so the wastewater contains a large number of unreacted 3-cyanopyridine. 2. Centrifugal chlorination wastewater is a high-phosphorus wastewater. Phosphate is produced during the non-chlorination reaction. The excess POCl3 is hydrolyzed to phosphoric acid when hydrolized. The molar yield of chlorination reaction is about 93%, so the wastewater is of high COD and high Phosphorus waste water. Due to the high phosphorous content of the waste water, lime is added to produce calcium phosphate precipitation. After centrifugation, the solid is sold to the outside for comprehensive utilization. At the same time, a large amount of flocs were formed during the sedimentation, and the flocs adsorbed macromolecule organic matter, but the effect of COD concentration as not satisfactory after centrifugation .

Thera. Category:Pharmaceutical and agricultural intermediate  

Cas No.2942-59-8



Molecular Formula:C6H4ClNO2

Molecular Weight: 157.55              


PackingExport worthy packing

lMaterial Safety Data SheetAvailable on request

Usage: Synthesis Pharmaceutical Intermediates

Active Pharmaceutical Ingredients> Cas 90098-04-7,Rebamipide Named In Mucosta With GMP Standard
Active Pharmaceutical Ingredients> Functional Dyspepsia Treatment Acotiamide Hydrochloride Trihydrate CAS 773092-05-0
Active Pharmaceutical Ingredients> Acotiamide Hydrochloride For Gastric Motility Improvement CAS 185104-11-4
Contract Manufacturing> ASCORBYL GLUCOSIDE Used for Comesitc Additive CAS 129499-78-1
Pharmaceutical Intermediates> Anti-Ulcerative> 2-Aminothiazole-4-ethylformate For Making Acotiamide Cas 5398-36-7
Pharmaceutical Intermediates> Anti-Ulcerative> Acotiamide INT CAS NUMBER 185105-98-0
Pharmaceutical Intermediates> Anti-Cardiovascular> Azilsartan Used for Hypertension Treatment CAS 147403-03-0
Pharmaceutical Intermediates> Anti-Diabetes> Sitagliptin Phosphate Monohydrate Treated for Type 2 diabetes CAS Number 654671-77-9
Pharmaceutical Intermediates> Anti-Ulcerative> Cas 132210-24-3, 2-Amino-3-(1,2-dihydro-2-oxo-quinoline-4-yl)Propanoic acid Hydrochloride For Rebamipide
Pharmaceutical Intermediates> Anti-Ulcerative> Cas 1068-90-2 White Crystalline Powder Diethyl Acetamidomalonate For Rebamipide(DAAM)
Active Pharmaceutical Ingredients> 6027-23-2, Hordenine HCL Powder
Pharmaceutical Intermediates> Anti-Ulcerative> Cas 4876-10-2,4-Bromomethyl-2(1H)-quinolinone (BMQ) For Rebamipide/ Mucosta
Pharmaceutical Intermediates> Anti-Respiratory> CAS 2338-18-3, 2-Aminoindan hydrochloride For Making Indacaterol
Pharmaceutical Intermediates> Anti-Respiratory> CAS 312753-53-0/ 5,6-Diethyl-2,3-dihydro-1H-inden-2-amine hydrochloride Used for Indacaterol
Pharmaceutical Intermediates> Anti-Respiratory> 312753-53-0, Indacaterol Intermediate
Pharmaceutical Intermediates> Anti-Respiratory> 100331-89-3, Indacaterol Intermediate

© 2019 CHINA WAY. All Rights Reserved.  Taizhou Volsen Chemical Co., Ltd.,  Inc.   All rights reserved. site map.  sitemap.html